Aim MXS 1.2 Compact Data Logger


Aim MXS 1.2 Compact Data Logger

£ 2079.00 - £2406.00 £ 99.00 - £114.00 £ 1980.00 - £2292.00

The MXS 1.2 is the evolution of MXS


SKU: N/A Category:

The MXS 1.2 is the evolution of MXS, the dash logger is designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog / digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5″ display has been specifically designed for installation in small cockpits.

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

A high contrast TFT display identifies MXS 1.2 at the first glance. An ambient light sensor keeps the back-light at optimum brightness levels

MXS 1.2 features six configurable RGB alarm LED’s. You choose the conditions, you choose the colours. Select a solid alarm or flashing alarm along the flashing frequency. Choose to have an accompanying text message and set the alarm priorities.

Aim MXS features two digital outputs. Each of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.


  • Display : 5” TFT
  • Resolution : 800×480 pixels
  • Contrast : 600:1
  • Brightness : 700cd/m2 – 1,100 Lumen
  • Ambient light sensor : Yes
  • Alarm LEDs : 6 RGB freely configurable
  • Shift lights : 10 integrated freely configurable RGB LEDs
  • CAN connections : 3
  • ECU connections : CAN, RS232 or K-Line
  • ECU compatibility : + 1,000 industry leading ECUs
  • Expansion CAN connection : GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD
  • Analog inputs : 8 fully configurable, max 1,000 Hz each
  • Digital inputs : 4 Speed inputs, lap signal, coil RPM input
  • Digital outputs : 2 (1 A max each)
  • Second CAN : Yes
  • Wi-Fi connection : Yes
  • Accelerometer : Internal Three-axial ± 5G + Three-axial Gyroscope
  • Internal memory : 4 GB
  • Body : Anodized Aluminum
  • Pushbuttons : Metallic
  • Connectors : 2 Motorsport connectors
  • Power consumption : 400 mA
  • Dimensions : 169.4x97x23 mm
  • Weight : 530 g
  • Waterproof : IP65

In the box

  1. Aim MXS 1.2 Compact Data Logger
  2. 37 Pin Standard Harness
  3. GPS Module with Cable
  4. USB Cable
  5. Software Installation CD

Additional information

Select GPS Option

GPS Module 50cm Cable, GPS Module 1.3m Cable, GPS Module 2m Cable, GPS Module 4m Cable, GPS Roof Version With 2m Cable, GPS Roof Version With 4m Cable

2nd Loom Option

None, MXS Harness 22 Pin Connection